Ldzh vertical belt screw cone mixer
Product Brief：The working principle of the screw belt and screw cone mixer is that the mixed materials are driven by the middle screw and the horizontal screw belt ...
The working principle of the screw belt and screw cone mixer is that the mixed materials are driven by the middle screw and the horizontal screw belt and circularly move up and down in the simplified body to continuously improve the materials and produce the mixing effect of shearing, convection and diffusion on the materials, so as to achieve the ideal mixing uniformity. When the jacket structure is adopted, the machine can realize the functions of vacuum, heating, cooling and other composite processes. Combined with other auxiliary equipment, it can be combined into a dry coal mixer which integrates drying and mixing, and is used for drying and mixing of materials with certain moisture content.
|Model / item||Full volume(M3)||Loading coefficient||power(kw)||size(mm)||weight|
Note: 1. The technical parameters in the table are based on the material proportion of 0.6.
2. In case of vacuum, heating, pressure resistance, cooling, drying, explosion, flammability, corrosion and other process conditions, the user must clearly inform and provide accurate relevant data, which can be customized after text confirmation.
3. Due to the diversity of equipment structure and auxiliary configuration, some of the configurations in the above description need to be selected by the user. Please select the appropriate configuration according to the physical properties and indicate it in writing when ordering. Welcome to consult our company's technical personnel to discuss the model selection.
1. Scope of application: this mixer can be used for mixing solid powder and viscous slurry through different mixing parts. There is no driving part in the cylinder, so there is no need to seal and lubricate, so there is no oil and other pollution in the container. All stainless steel manufacturing, high-quality surface treatment, can fully comply with GMP standards, especially for pharmaceutical, food, battery and other industries with strict impurity control.
2. According to different materials, the mixing components can be composed of forward or reverse spiral in the middle and continuous or disconnected spiral strip in the outer layer. At high speed, the strong mixing effect is gentle but completely mixes the flowable materials at low speed. A large number of materials can be mixed in a short time.
3. The jacket can be added outside the mixer shell for heating and cooling, and the operation of material cooling or heating and drying can be realized by injecting cold and hot medium into the jacket; the cooling water for industrial use is generally pumped, and steam, heat-transfer oil or electric heating can be applied for heating.
4. Feeding mode: the standard top cover is of flat structure, with small feeding opening, which can be fed from the top by means of bucket elevator, auger conveyor, etc. in small-scale production occasions, the cylinder cover can be made into a half open type, so as to facilitate manual feeding and internal cleaning of the equipment.
5. According to the material conditions, the discharge valve can be ball valve, butterfly valve, gate valve, plum valve, manual, pneumatic and other structural forms. In addition, in view of the mixing characteristics of the conical screw belt mixer, it is also suitable for the mixing of flow materials. In this environment, the discharge valve needs to be changed to butterfly valve or ball valve.
6. Self heating mode: when self heating is required, the heating electric coupling is usually inserted at the bottom of the jacket filled with heat transfer oil, which can meet the heating requirements of low heat degree. If possible, users can use the external heating heat transfer oil, and then pump the heat oil into the jacket for circulation, which can ensure that the materials are evenly heated.
1. According to the material characteristics, add appropriate configuration, and combine into a drying and mixing integrated system. Drying by conduction heating has the advantages of high efficiency and energy saving.
2. The cylinder can be designed as a form with a jacket, which is filled with hot and cold media to meet the user's requirements for process temperature control.
3. It is designed to operate under vacuum or pressure conditions.
4. The upper cover, sealing device and discharge valve can be designed according to the user's requirements, and can be manually or pneumatically operated.
5. The upper cover is designed as the head structure according to the user's requirements.
6. Equipped with pressure or air flow liquid spraying device.
7. A flying knife cutting device can be added to cut and crush materials to meet the process requirements. There are many types of blades available.
8. Non standard design and manufacturing can be carried out according to the special requirements of users.
9. Various materials available: carbon steel, 304L, 316L stainless steel, titanium, etc.